Commission Delegated Regulation (EU) 2016/1824 of 14 July 2016 amending Delegated Regulation (EU) No 3/2014, Delegated Regulation (EU) No 44/2014 and Delegated Regulation (EU) No 134/2014 with regard, respectively, to vehicle functional safety requirements, to vehicle construction and general requirements and to environmental and propulsion unit performance requirements (Text with EEA relevance)

Delegated Regulation (EU) No 3/2014 is amended as follows: (1) in Article 3(2), ‘Manufacturers’ is replaced by ‘Manufacturers of parts and equipment’; (2) the Annexes are amended in accordance with Annex I to this Regulation.

Delegated Regulation (EU) No 44/2014 is amended as follows: (1) in Article 3(2), ‘Manufacturers’ is replaced by ‘Manufacturers of parts and equipment’; (2) the Annexes are amended in accordance with Annex II to this Regulation.

Delegated Regulation (EU) No 134/2014 is amended as follows: (1) Article 2 is amended as follows (a) in point (16), ‘ehaust’ is replaced by ‘exhaust’; (b) point (42) is replaced by the following: ‘(42) “maximum thirty minutes speed” of a vehicle means the maximum achievable vehicle speed measured during 30 minutes as a result of the 30 minute power set out in UNECE regulation No 85 ; (2) in Article 3(4), ‘manufacturer’ is replaced by ‘manufacturer of parts and equipment’; (3) the Annexes are amended in accordance with Annex III to this Regulation.

This Regulation shall enter into force on the first day following that of its publication in the Official Journal of the European Union.